[Home ] [Archive]   [ فارسی ]  
:: Main :: About :: Current Issue :: Archive :: Search :: Submit :: Contact ::
:: Volume 15, Issue 1 (9-2018) ::
JSRI 2018, 15(1): 1-44 Back to browse issues page
Constrained Optimal Design of $bar{X}$ Control Chart for Correlated Data under Weibull Shock Model with Multiple Assignable Causes and Taguchi Loss Function
Mohammad Hossein Naderi, Asghar Seif, Mohammad Bameni Moghadam *
Allameh Tabatabaee , bamenimoghadam@atu.ac.ir
Abstract:   (587 Views)
A proper method of monitoring a stochastic system is to utilize the control charts of statistical process control in which a drift in characteristics of output may be due to one or several assignable causes. In the establishment of $bar{X}$  charts, an assumption is made that there is no correlation within the samples. However, in practice, there are many industrial cases in which the correlation does exist within the samples. It would be more appropriate to assume that each sample is a realization of a multivariate normal random vector. Although some research works have been done on the economic design of control charts with single assignable cause with correlated data, the economic statistical design of $bar{X}$  control chart for correlated data under Weibull shock model with modified Taguchi loss function have not been presented yet. Using modified Taguchi loss function in the concept of quality control charts with economic and economic statistical design leads to better decisions in the industry. Based on the optimization of the average cost per unit of time and different combination values of Weibull distribution parameters, optimal design values of sample size, sampling interval and control limit coefficient were derived and calculated. Then the cost models under non-uniform and uniform sampling scheme were compared. The results revealed that the model under multiple assignable causes with correlated samples with non-uniform sampling has a lower cost than that with uniform sampling.
Keywords: Economic statistical design, $bar{X}$ control chart, multiple assignable causes, Weibull shock model, correlated data, Taguchi loss function.
Full-Text [PDF 841 kb]   (160 Downloads)    
Type of Study: Research | Subject: General
Received: 2017/05/3 | Accepted: 2018/05/14 | Published: 2019/03/2
References
1. Al-Ghazi, A., Al-Shareef, K. and Duffuaa, S.O. (2007). Integration of Taguchi's Loss Function in the Economic Design of -Control Charts with Increasing Failure Rate and Early Replacement. In 2007 IEEE International Conference on Industrial Engineering and Engineering Management, 338-346. [DOI:10.1109/IEEM.2007.4419384]
2. Al-Oraini, H.A. and Rahim, M.A. (2002). Economic Statistical Design of Control Charts for Systems with Gamma (λ,2) in-control Times. Computers & Industrial Engineering, 43, 645-654. [DOI:10.1016/S0360-8352(02)00119-5]
3. Banerjee, P.K. and Rahim, M.A. (1988). Economic Design of X ̅-Control Charts under Weibull Shock Models. Technometrics, 30, 407-414.
4. Ben-Daya, M. and Duffuaa, S.O. (2003). Integration of Taguchi's Loss Function Approach in the Economic Design of X ̅ Chart, International Journal of Quality & Reliability Management, 20, 607-619. [DOI:10.1108/02656710310476552]
5. Cain, M. and Janssen, C. (1997). Target Selection in Process Control under Asymmetric Costs. Journal of quality technology, 29, 464. [DOI:10.1080/00224065.1997.11979797]
6. Chen, F.L. and Yeh, L.L. (2010). Economic Statistical Design of -Control Charts for Correlated Data and Gamma Failure Mechanism with Genetic Algorithm. In Computers and Industrial Engineering (CIE), 2010 40th International Conference on (pp. 1-6). IEEE, [DOI:10.1109/ICCIE.2010.5668330]
7. Chen, Y.K., Hsieh, K.L. and Chang, C.C. (2007). Economic Design of the VSSI Control Charts for Correlated Data. International Journal of Production Economics, 107, 528-539. [DOI:10.1016/j.ijpe.2006.10.008]
8. Chen, Y.S. and Yang, Y.M. (2002). Economic Design of -Control Charts with Weibull in-Control Times When There are Multiple Assignable Causes. International Journal of Production Economics, 77, 17-23. [DOI:10.1016/S0925-5273(01)00196-7]
9. Chou, C.Y., Chen, C.H. and Liu, H.R. (2001). Economic Design of -Control Charts for Non-normally Correlated data. International Journal of Production Research, 39, 1931-1941. [DOI:10.1080/00207540110034913]
10. Chung, K.J. (1991). Economic Designs of Attribute Control Charts for Multiple Assignable Causes. Optimization, 22, 775-786. [DOI:10.1080/02331939108843719]
11. Duncan, A.J. (1956). The Economic Design of X ̅ Charts Used to Maintain Current Control of a Process. Journal of the American Statistical Association, 51, 228-242. [DOI:10.2307/2281343]
12. Duncan, A.J. (1971). The Economic Design of X ̅-Charts When There is a Multiplicity of Assignable Causes. Journal of the American Statistical Association, 66, 107-121. [DOI:10.1080/01621459.1971.10482230]
13. Elsayed, E.A. and Chen, A. (1994). An Economic Design of Control Chart Using Quadratic Loss Function. THE INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 32, 873-887. [DOI:10.1080/00207549408956976]
14. Ghanaatiyan, R., Amiri, A., and Sogandi, F. (2017). Multi-objective Economic Statistical Design of VSSI-MEWMA-DWL Control Chart with Multiple Assignable Causes. Journal of Industrial and Systems Engineering, 10, 34-58.
15. Gibra, I.N. (1981). Economic Design of Attribute Control Charts for Multiple Assignable Causes. Journal of Quality Technology, 13, 93-99. [DOI:10.1080/00224065.1981.11980997]
16. Girshick, M. A. and Rubin, H. (1952), A Bayes approach to a quality control model. The Annals of mathematical statistics, 114-125. [DOI:10.1214/aoms/1177729489]
17. Heydari, A.A., Moghadam, M.B. and Eskandari, F. (2016). Economic and Economic Statistical Designs of X ̅ Control Charts under Burr XII Shock Model. International Journal of Quality Engineering and Technology, (Accepted). [DOI:10.1504/IJQET.2016.081626]
18. Kim, M.W. and Liao, W.M. (1994). Estimating Hidden Quality Costs with Quality Loss Functions. Accounting Horizons, 8, 8.
19. Koo, T.Y. and Lin, L.M. (1992). PAPER SESSION II-B: Economic Design of X ̅ Chart When Taguchi's Loss Function is Considered, 166-178.
20. Kraleti, S.R. and Kambagowni, V.S. (2010). Optimal Design of -Control Chart with Pareto in-Control Times. The International Journal of Advanced Manufacturing Technology, 48, 829-837. [DOI:10.1007/s00170-009-2348-5]
21. Leavenworth, R.S. and Grant, E.L. (2000). Statistical Quality Control. Tata McGraw-Hill Education.
22. Liu, H.R., Chou, C.Y. and Chen, C.H. (2002). Minimum-loss Design of Charts for Correlated Data. Journal of Loss Prevention in the Process Industries, 15, 405-411. [DOI:10.1016/S0950-4230(02)00043-8]
23. Lorenzen, T.J. and Vance, L.c. (1986). The Economic Design of X ̅ Control Charts: a Unified Approach. Technometrics, 28, 3-10. [DOI:10.1080/00401706.1986.10488092]
24. Moghadam, M.B., Moghadam, M.G., Rafie, S. and Naderi, H. (2016). A Generalized Version of Banerjee and Rahim Model in Economic Design of X ̅ Control Chart under Generalized Exponential Shock Model Using Non-uniform Sampling Scheme. Iranian Journal of Science and Technology, Transactions A: Science (ISTT). accepted (ISTT-D-16-00111R2).
25. Moskowitz, H., Plante, R. and Chun, Y.H. (1994). Effect of Quality Loss Functions on the Economic Design of Process Control Charts. European Journal of Operational Research, 72, 333-349. [DOI:10.1016/0377-2217(94)90314-X]
26. Nelder, J.A. and Mead, R. (1965). A Simplex Algorithm for Function Minimization. Computer Journal, 7, 308–313. [DOI:10.1093/comjnl/7.4.308]
27. Nenes, G., Tasias, K.A., and Celano, G. (2015). A General Model for the Economic Statistical Design of Adaptive Control Charts for Processes Subject to Multiple Assignable Causes. International Journal of Production Research, 53, 2146-2164. [DOI:10.1080/00207543.2014.974850]
28. Neuhardt, J.B. (1987). Effects of Correlated Sub-samples in Statistical Process Control. IIE transactions, 19, 208-214. [DOI:10.1080/07408178708975388]
29. Rahim, M.A. and Banerjee, P.K. (1993). A Generalized Model for the Economic Design of Control Charts for Production Systems with Increasing Failure Rate and Early Replacement. Naval Research Logistics (NRL), 40, 787-809. https://doi.org/10.1002/1520-6750(199310)40:6<787::AID-NAV3220400605>3.0.CO;2-4 [DOI:10.1002/1520-6750(199310)40:63.0.CO;2-4]
30. Safaei, A.S., Kazemzadeh, R.B. and Niaki, S.T.A. (2012). Multi-objective Economic Statistical Design of X ̅-Control Chart Considering Taguchi Loss Function. The International Journal of Advanced Manufacturing Technology, 59, 1091-1101. [DOI:10.1007/s00170-011-3550-9]
31. Salmasnia, A., Abdzadeh, B. and Namdar, M. (2017). A Joint Design of Production Run Length, Maintenance Policy and Control Chart with Multiple Assignable Causes. Journal of Manufacturing Systems, 42, 44-56. [DOI:10.1016/j.jmsy.2016.11.003]
32. Saniga, E.M. (1989). Economic Statistical Control-chart Designs with an Application to and R Charts. Technometrics, 31, 313-320. [DOI:10.2307/3556141]
33. Saniga, E.M. and Shirland, L.E. (1977). Quality Control in Practice: a Survey. Quality Progress, 10, 30-33.
34. Serel, D.A., Dada, M., Moskowitz, H. and Plante, R.D. (2003). Investing in Quality under Autonomous and Induced Learning. IIE Transactions, 35, 545-555. [DOI:10.1080/07408170304415]
35. Serel, D.A. and Moskowiz, H. (2008). Joint Economic Design of EWMA Control Charts for Mean and Variance. European Journal of Operational Research, 184, 157-168. [DOI:10.1016/j.ejor.2006.09.084]
36. Shewhart, W.A. (1924). Some Applications of Statistical Methods to the Analysis of Physical and Engineering Data. Bell System Technical Journal, 3, 43-87. [DOI:10.1002/j.1538-7305.1924.tb01347.x]
37. Taguchi, G., Chowdhury, S., and Wu, Y. (2005). Taguchi's Quality Engineering Handbook (p. 1736). Hoboken, NJ: John Wiley and Sons.
38. Taguchi, G., Elsayed, E.A. and Hsiang, T.C. (1989). Quality Engineering in Production Systems. McGraw-Hill College.
39. Tasias, K.A. and Nenes, G. (2016). Economic Statistical Design of Vp Control Schemes for Joint Monitoring of Mean and Variance in the Presence of Multiple Assignable Causes. Quality Technology & Quantitative Management, 1-23.
40. Woodall, W.H. (1986). Weaknesses of the Economic Design of Control Charts. Technometrics, 28, 408-409. [DOI:10.2307/1269000]
41. Yang, S.F. (1998). Economic Statistical Design of S Control Charts using Taguchi Loss Function. International Journal of Quality & Reliability Management, 15, 259-272. [DOI:10.1108/02656719810209446]
42. Yang, Y.M., Su, C.Y. and Pearn, W.L. (2010). Economic Design of -Control Charts for Continuous Flow Process with Multiple Assignable Causes. International Journal of Production Economics, 128, 110-117. [DOI:10.1016/j.ijpe.2010.04.048]
43. Yang, K. and Handcock, W.M. (1990). Statistical Quality Control for Correlated Samples. THE INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 28, 595-608. [DOI:10.1080/00207549008942738]
44. Yu, F.J. and Chen, H.K. (2009). Economic-Statistical Design of X ̅ Control Charts Using Taguchi Loss Functions. IFAC Proceedings, 42, 1719-1723. [DOI:10.3182/20090603-3-RU-2001.0098]
45. Yu, F.J., Tsou, C.S., Huang, K.I. and Wu, Z. (2010). An Economic-Statistical Design of -Control Charts with Multiple Assignable Causes. 17, 327-338.
46. Zhang, G. and Berardi, V. (1997). Economic Statistical Design of Control Charts for Systems with Weibull in-Control Times. Computers & Industrial Engineering, 32, 575-586. [DOI:10.1016/S0360-8352(96)00314-2]
Send email to the article author

Add your comments about this article
Your username or Email:

CAPTCHA



XML   Persian Abstract   Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Naderi M H, Seif A, Bameni Moghadam M. Constrained Optimal Design of $bar{X}$ Control Chart for Correlated Data under Weibull Shock Model with Multiple Assignable Causes and Taguchi Loss Function. JSRI. 2018; 15 (1) :1-44
URL: http://jsri.srtc.ac.ir/article-1-289-en.html


Volume 15, Issue 1 (9-2018) Back to browse issues page
مجله‌ی پژوهش‌های آماری ایران (علمی - پژوهشی) Journal of Statistical Research of Iran JSRI
Persian site map - English site map - Created in 0.06 seconds with 32 queries by YEKTAWEB 4006